How to Fix Lorex Camera Blue Light Issue: A Complete Guide

Quick Answer 

The Lorex camera blue light indicates that the camera is powered, connected to a network, has been paired, or is showing a specific status. Depending on your model of Lorex camera, you can solve the odd blue light issue by checking that it is using a power source, ensuring that you have a good Wi-Fi connection, restarting your camera, looking at the settings for your camera, and updating your firmware if there are any updates available. If the light continues to show an odd colour, check the manual for your model before doing a factory reset.

Introduction

Lorex security cameras allow homeowners to keep a closer eye on their property with features such as live video feed, motion alerts, and remote access. When strange blue lights start to appear, it can be confusing to figure out what they mean, especially when your camera isn’t connecting to your app or is not responding. Whether your Lorex Cloud is flashing blue or has a solid blue light, knowing the status of your camera will help you to solve the issue. This guide will show you what the blue light could mean, how to solve some common issues, and when to look at your camera settings.

What Does the Blue Light on a Lorex Camera Mean?

Depending on your camera model, there are many reasons why you may see a ‘Lorex camera solid blue light’. This could be during boot-up, when trying to connect to the network, when trying to pair the camera, or just generally during normal use. You shouldn’t always assume that if the light is blue, there will be an issue.

Some reasons could be:

• Flashing blue light – Your camera may be trying to connect to WiFi, trying to pair with the app, or trying to finish setup.
• Solid blue light – Your camera may be switched on or showing that it is in a certain mode.
• If it remains lit blue – Your camera may be waiting to connect, having an issue during boot-up, or just showing that the camera is in a certain state. This can be changed on supported models.
• If it has connection issues – Your camera may not be connecting because of incorrect details, low signal strength, the router, or if it is not fully set up.

Please check your official manual for your specific model to find out what each light means. Not all Lorex cameras have the same light codes; some models don’t have any visible status lights or may have different colours.

How to turn off the blue light on a Lorex camera?

The first thing to do when trying to turn off the Lorex camera blue light is to check to see if your camera has an option within the Lorex app/recorder to switch off the light. This option can be found under the Status LED/Indicator light section. If the option isn’t available, then there may not be anything wrong with your camera; rather, it’s just working.

If the light still isn’t switching off, then try restarting the camera. Simply unplug the camera from its power source as instructed by the manufacturer. After around 30 seconds, plug the camera back in and see if the light has changed. Check for any issues with your network connection and ensure you have the latest Lorex camera firmware update for your camera installed. If the problem still occurs, then you should refer to your camera’s manual to find out exactly what the blue light means. Lastly, you can try the option to reset Lorex camera.

How To Fix Lorex Cloud Blue Blinking Light?

Here are some steps you can take to fix your Lorex Cloud blue blinking light:

1.) Check Camera Status: Open up the Lorex Cloud App and check if your camera is online or offline. Refer to your manual for your camera model type to see what the blue blinking light means.

2.) Restart the camera: Unplug your camera from its power source as per the instructions given by the manufacturer and wait for 30 seconds. Then plug it back into the power source and allow it to fully reboot.

3.) Check Internet Connection: Ensure your router is working properly and that your camera is connecting to Wi-Fi properly. The camera should be connected to an appropriate network.

4.) Check camera Settings: Check that there are no connection errors in your app and ensure your camera is properly registered.

5.) Firmware Update: Look to see if there is an appropriate Lorex camera firmware update available for your camera. You should look at either the Lorex support page or your device’s supported method.

6.) Reconnect camera: If you still have issues, follow the manufacturer’s instructions to reconnect your camera to the app based on your camera model.

7.) Factory Reset: As a last resort, use the manufacturer’s factory reset instructions. This will reset your camera to factory settings and delete any previously saved settings.

Note: Not all cameras will have issues when they have a blue blinking light. Be sure to check your Lorex camera model’s documentation.

Common Problems and Solutions for Lorex Camera Blue Light Issues

• Flashing blue light: Ensure you are connected and set up your camera
• Solid blue light: Check the manual for your specific model to ensure this is a normal light
• Camera not connecting: Ensure you have the correct Wi-Fi details and that you have enough signal; also make sure your router is working.
• Camera firmware issues: Ensure you have updated firmware for your Lorex camera.
• Unresponsive camera: Turn your camera off and back on; also check your power source.
• Blue light still on: Check your camera settings to see if you can turn the light off.
• Still not connecting: Reconnect via the Lorex app; follow the instructions for your specific model.
• Still getting a blue light: As a last resort, you can reset your Lorex camera, although this may cause you to lose your settings.

FAQs