How to Reset Lorex Camera Quickly and Safely?

To reset Lorex camera, power it on and wait about 60 seconds for it to boot. Then press and hold the pinhole reset button for seconds until the LED , release it, and wait 1-2 minutes for the camera to restart. This restores factory settings, and you’ll need to set the camera up again in the Lorex app. After resetting, reconnect the camera to your Wi-Fi network and reconfigure settings through the Lorex app.

If your Lorex camera is not responding, cannot connect to the network, or has configuration problems, a factory reset may help restore it to its default settings. If basic troubleshooting (restarting the camera, checking Wi-Fi, updating the app) doesn’t fix the problem, a factory reset is the next step.

Whether you have forgotten your password, are facing connectivity issues, or are setting up a second-hand unit. This guide covers four methods: the physical reset button, browser password recovery, resetting through an NVR/DVR, and a full recorder factory reset.

Why reset Lorex camera?

There are several reasons why one may want to reset their camera. These can be—

• • You have forgotten your password and cannot access the system

• • The camera is malfunctioning or cannot connect to the internet

• • You are selling or giving away the camera and need to reset it

• • The camera is having problems after trying to update its firmware

• • You bought a used camera and want to remove the previous owner’s settings and account

The reset steps depend on your model. Find your model number on the label on the camera’s back or base, then check the table below.

How does Lorex camera reset help?

Before we get started, it is important to note what a reset operation on your Lorex camera does. For a factory reset operation on a Lorex camera:

• • A factory reset can remove customized settings, network configurations, and device credentials, depending on the Lorex model and reset method.

• • The camera is restored to its factory-default configuration.
  • After a factory reset, you may need to complete the initial setup process again and reconnect the camera to your network or compatible Lorex app, depending on the model.
  • Resetting the camera does not necessarily erase recordings stored on an SD card or NVR/DVR, but storage behavior can vary by model and reset method.

Easy Steps to Reset Lorex Camera

Resetting the camera to factory settings is easy and can be done in simple steps. Here’s what you can do:

Lorex Camera Reset Using the Reset Button

The most reliable and commonly used method is the physical lorex camera reset button.

This method is recommended if you are completely unable to use your Lorex camera app and web interface.

Steps to reset Lorex camera using the reset button:

• • Turn your Lorex camera on and allow it to fully boot up, which takes around 30-60 seconds.

• • Locate your reset button, which is usually a pinhole button located on the back, bottom, or side of your Lorex camera. You might need a paperclip or a SIM ejector pin to do this.

• • Press and hold the reset button for [10] seconds, using a paperclip or SIM ejector pin.

• • Release the button when the LED [flashes/turns solid red/changes color] or the camera restarts.

• • Allow your Lorex camera to restart, and this might take 1-2 minutes.

• • Once the camera restarts, it is back to factory settings and ready to be set up again.

Tip: Always check your Lorex camera manual for the location of your Lorex camera reset button, as different Lorex cameras have different button locations.

How to Reset a Lorex Camera Password from a Web Browser?

If you can access the camera or recorder interface but have forgotten the administrator password, use the password-recovery option available for your specific Lorex model.

• • Launch a browser and enter the IP address of the camera in the browser’s address bar.

• • Click “Forgot Password” on the login page and follow the on-screen prompts. Depending on your model, you may need [a security question, a QR code scan, or an email code.

• • Reset the password according to the instructions on the page.

• • Sign in using the new credentials through the compatible Lorex app or interface for your device.

If you are unable to access the ‘Forgot Password’ option on the login page, you can use the physical reset method as explained above.

How to Reset a Lorex Camera Password Using an NVR/DVR?

If your Lorex camera is connected to an NVR or DVR, some systems provide options for managing camera credentials through the recorder’s interface. Available options vary by model, and some systems may allow you to manage camera credentials without physically accessing the camera.

• • Connect your NVR/DVR to a monitor using an HDMI or VGA cable, and log in with the admin account.
  • Right-click on the screen displaying the camera’s live view.

• • From the drop-down menu, select the Main Menu option.

• • Open the camera, account or device-management section available on your NVR/DVR. Menu names and options vary by recorder model.

• • From the menu, select the camera or the user account you want to reset the password for.

• • From the menu, select the “Reset Password” option and set the new password.

How to Factory Reset a Lorex NVR/DVR Recorder from the System Menu?

If you want to restore the entire Lorex NVR/DVR system to its default settings, you can use the factory-reset options available in the recorder’s system menu:

• • To do a “Factory Default” or “Restore All Settings,” you will need to go to the “Main Menu” in the NVR/DVR system, then go to “System” > “Maintain” or “System” > “Default”. 

• • Now you can select “Factory Default” or “Restore All Settings,” then confirm the action.

A factory reset of the NVR/DVR affects the recorder’s system settings and may be useful when transferring ownership. Confirm which settings will be removed before proceeding.

Lorex Camera Firmware Update After Resetting

After you reset your Lorex camera, check whether a firmware update is available for your specific model. An official firmware update may provide bug fixes, security improvements, or compatibility improvements for your specific Lorex model.

Steps for Lorex camera firmware update:

• • Check the official Lorex support resources or the compatible Lorex app for firmware-update instructions specific to your camera model.

• • Open the device or system settings and look for the firmware update option. The menu location can vary depending on your Lorex camera, NVR, DVR, or compatible app.

• • If an update is available, click “Check for Update” and follow the on-screen instructions.

• • You may also download the firmware update file directly from the official Lorex support website and update the firmware manually for your NVR or DVR.

• • Do not turn off the device while updating the firmware.

Warning: It is recommended that you backup your current settings prior to a Lorex camera firmware update, as some firmware may require resetting your configurations.

The Final Word

Use the reset button if you can’t log in, browser or NVR/DVR password recovery if you can still reach the interface, and the recorder’s factory reset only when you want to wipe the whole system. After any reset, reconfigure your credentials and check for firmware updates.

FAQs